Draft Arc 3Points/ru

Дуга

Окружность

Верстак "Draft"

Описание

The Draft Arc 3Points command creates a circular arc on the current working plane from three points that define its circumference. The center and radius are calculated from these points.

A Draft Arc is in fact a Draft Circle with a ДанныеFirst Angle that is not the same as its ДанныеLast Angle.

Arc defined by three points on its circumference

Применение

See also: Draft Tray, Draft Snap and Draft Constrain.

1. There are several ways to invoke the command:
   • Press the Arc by 3 points button.
   • Draft: Select the Drafting → Arc tools → Arc by 3 points option from the menu.
   • BIM: Select the 2D Drafting → Arc by 3 points option from the menu.
   • Use the keyboard shortcut: A then T.
2. The Arc by 3 points task panel opens. See Options for more information.
3. Pick the first point in the 3D view, or type coordinates and press the Enter point button.
4. Pick the second point in the 3D view, or type coordinates and press the Enter point button.
5. Pick the third point in the 3D view, or type coordinates and press the Enter point button.

Опции

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 1.0).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, coordinates are relative to the last point, if available, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating arcs.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

Примечания

• A Draft Arc can be edited with the Draft Edit command.

Настройки

See also: Preferences Editor and Draft Preferences.

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a non-editable Part Feature instead of a Draft Circle.

Свойства

See Draft Circle.

Программирование

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Arc by 3 points use the make_arc_3points method of the Draft module:

arc = make_arc_3points(points, placement=None, face=False, support=None, map_mode="Deactivated", primitive=False)

• Creates an arc object from the given points list.
• If a placement is given, the center of the circular arc will be moved to this place. See Placement for more information.
• If face is True, the arc will make a face, that is, it will appear filled.
• If support is given, it is a LinkSubList, that is, a list indicating an object and a subelement of that object. This is used so that the object appears referenced to this support.

For example: support=[(obj, ("Face1"))].

• If map_mode is given, it is a string defining a type of mapping, for example: map_mode='FlatFace', map_mode='ThreePointsPlane', etc. See Part EditAttachment for more information.
• If primitive is True, the arc created will be a simple Part Feature, not a complex Draft object.

Пример:

import FreeCAD as App
import Draft

doc = App.newDocument()

points = [App.Vector(0, 0, 0),
          App.Vector(5, 10, 0),
          App.Vector(10, 0, 0)]

arc = Draft.make_arc_3points(points)

doc.recompute()

Дуга

Окружность

Верстак "Draft"

Draft

• Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
• Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
• Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view

---

• Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid

---

• Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
• Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
• Context menu:
  • Layer container: Merge layer duplicates, Add new layer
  • Layer: Activate this layer, Select layer contents
  • Text: Open hyperlinks
  • Wire: Flatten
  • Working plane proxy: Write camera position, Write objects state

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков